Thanks to everyone who joined us our special Pre-SET Training Net last evening. We began the net on the 147.090 repeater and after closing the net on the repeater, we moved over to 146.580 FM Simplex. Below is the complete Net Report:
Date: 10/07/2021 Start Time: 7:00 PM Frequency: 147.090 (+ / 100 Hz) FM repeater, located on Blackstrap Mt., Falmouth, ME Net Control: Tim Watson KB1HNZ, Battery Power, in Saco, ME
Check-ins: 4 Ben, KC1HBL, Commercial Power, in Buxton, ME Dave, KB1FGF, Commercial Power, in Scarborough, ME Brad, KC1JMH, Battery Power, in N. Waterboro, ME Ed, W1XAW, Mobile, Battery Power, Portland, ME
Traffic Handled: 1 Brad brought one piece of through traffic to the net, for KX7YT, in Portland, OR. This will be held and forwarded via Winlink during the SET, on Saturday.
Secure at: 7:22 PM
Simplex Net Details: Start Time: 7:23 PM Frequency: 146.580 FM Simplex Net Control: Tim KB1HNZ, Battery Power, in Saco, ME Check-ins: 5 Ben, KC1HBL, Commercial Power, in Buxton, ME Dave, KB1FGF, Commercial Power, in Scarborough, ME Brad, KC1JMH, Battery Power, in N. Waterboro, ME Steve, WZ1J, Commercial Power, Brunswick, ME Steve, W1GR (Club Call Sign), Commercial Power, Brunswick, ME Secure at: 7:38 PM
When: Saturday, October 9, from 8:00 AM – 12:00 PM
Thanks to everyone who’s been joining us during our monthly WSSM-ECT Training Nets! Over the past several months, we’ve successfully tested communications on multiple bands and modes, including VHF repeaters, 2m FM Simplex, 40 and 80 meters SSB, and Winlink. Now its time to put these skills to use during the 2021 Simulated Emergency Test (SET)!
The scenario for this year’s SET is a solar storm that disrupts the electrical grid and communications, including landline telephone, internet and cellular services.
If you’re interested in participating, please click here to familiarize yourself with the “Final” SET plan for Saturday’s statewide test.
To begin with, we’ll meet at 8:00 AM on the Cumberland County primary repeater 147.090. We’ll use this to trouble shoot problems amongst ourselves and coordinate which simplex and HF frequencies to use during the SET, but we won’t be using the repeater to exchange any traffic.
Please help out with as many tasks as you’re able to:
Task #4 on the SET Plan will be our first task on Saturday – It asks that we perform radio checks with nearby counties. We’ll take this opportunity to try different VHF simplex channels as well as HF, and contact other ARES and EmComm groups and individuals as we can. Keep a log of your contacts and which county EMA they are associated with, if any. Also be prepared to receive or relay radiogram traffic, as some may have traffic already prepared. See the explanation in the SET plan for more info. This will be performed Saturday during the SET.
Task #5 is to check into the Statewide ARES net, which will take place on 3945 kHz LSB. The net will be active from 9:30 AM through 11:30 AM EST. Net Control will be run by W1AXS. Eric N1RXR will be checking in on our behalf, as WX1GYX, but we encourage anyone with HF capabilities to check in. Identify yourself with your personal call sign and “Cumberland County Emergency Communications Team.” This will be performed Saturday during the SET.
Tasks #6, #7, and #8 are all related to Winlink.
Broken down, task #6 requires us to send radiograms via Winlink. There will be three components to this, so everyone can participate, regardless of Winlink capability or experience.
This element will be organized by county and will take the form of an informal contest with points awarded to counties based on the activity level.
There will be three types of operators in each county:
The Message Originator. This person will compose a formal radiogram in text format. The radiogram will be addressed to an out of state party, either someone that the originator knows or to a traffic handler on the list of “willing” recipients. The originator will send the radiogram by voice over the radio (any band) to a relay station. The originator will also send a copy of their radiogram by email to firstname.lastname@example.org.
The Relay Station. This person will copy the radiogram and then relay it to the designated Winlink relay. Any mode may be used but the message must leave the relay station by RF. Modes could include NBEMS, voice, cw, etc. Depending on how each county group is structured, the person in this role could be the same as the person in #3. Tim KB1HNZ will act as the Relay Station, operating from the Bunker, during the SET, however, depending on coverage, we may ask others to help with this.
The Winlink Relay. This person will collect the radiograms from the various relays and forward the messages to KB1TCE. KB1TCE will inject the radiograms into the Digital Traffic Network. Brad KC1JMH will act as our Winlink Relay during the SET.
Most of our participants will fall under the Message Originator category, and their task will be to send a radiogram message by voice. You may operate from home, mobile or portable. We will have a net at 7:00 PM Thursday evening on the 147.090 repeater to begin this part of the task, but if you can’t make it then, we will also accept traffic Saturday morning during the SET as well.
Don’t worry if you’re unsure of who to address a message to, or even what the content should be. We’ll help you out with that part.
We encourage anyone who has the ability to connect to Winlink, to log on and send radiogram traffic during the SET, but if you don’t have that capability yet, that’s okay. We’ll ask that participants without Winlink share their traffic via voice, with Net Control, either Thursday evening, or Saturday morning. The Net Control Relay Station will collect those messages and forward them to Brad KC1JMH, who will be acting as our Winlink Relay Station, to forward messages via Winlink.
Task #7 is to retrieve a file via Winlink, which anyone with Winlink capability can do. Anyone in our group who has Winlink or Packet capability is encouraged to participate in this task. This will be performed Saturday during the SET.
Task #8 is to send digital data through the Maine Packet Network. Anyone in our group who has Packet capability is encouraged to participate in this task. This will be performed Saturday during the SET.
Your participation is important! Not only is this an important learning exercise, to help us determine areas to improve upon, but it is also our opportunity to showcase our capabilities and demonstrate what we have learned and built upon during the year.
Please join us this evening at 7:00 PM on the W1QUI 147.090 (+ / 100) repeater, for our monthly On-Air Drill!
The topic for this evening is to review the components of the ARRL Radiogram and to compose and sent test messages that will be similar to those we’ll be sending during ARRL Field Day. We’ll start out on the repeater and move over to 146.580 FM simplex for a roll call. On simplex, we’ll exchange signal reports with each other, note who we can copy, and send traffic.
The purpose of this net is to focus on developing skills, such as familiarity with message forms, traffic handling, using modes like FM Simplex, Winlink, Packet, and the FLDigi suite, while fostering an interest in and recruiting newcomers to emergency communications.
Please join us this evening, February 25th, at 7:00 PM on the W1QUI 147.090 (+ / 100) repeater, for our monthly On-Air Drill!
Tonight we’ll be discussing message forms, including an overview of the different parts of the ARRL Radiogram and ICS-213 forms. We’ll also be sending some exercise traffic, so participants can get accustomed to sending and receiving traffic over the air.
Over the next few months, we’ll make use of different modes and bands, focusing on developing skills, such as familiarity with message forms, traffic handling, using modes like FM Simplex, Winlink, Packet, and the FLDigi suite, while fostering an interest in and recruiting newcomers to emergency communications.
Please join us tomorrow evening, January 28th, at 7:00 PM on the W1QUI 147.090 (+ / 100) repeater, for our first On-Air Drill of the new year!
We’ll first meet on the repeater, where we can exchange traffic and share announcements, and once everyone’s checked-in, we’ll move over to 146.580 simplex for a roll call. On simplex, we’ll exchange signal reports with each other and note who we can copy.
Over the next few months, we’ll make use of other modes and bands, focusing on developing skills, such as familiarity with message forms, traffic handling, using modes like FM Simplex, Winlink, Packet, and the FLDigi suite, while fostering an interest in and recruiting newcomers to emergency communications.